Vertical Pumps MT-32 / MT-50
Centrifugal vertical pump models “MT” are special indicated for fresh or salty water. compact, space-saving and rugged design.
Flow curve
Please consult us for any other flow combination
| Model. | Motor. | Max. Flow | Max. Pressure | Max. Intensity |
| MT-32 | Motor 5,5 hp. 220-380 III 50hz. | 6.000 lts/h | 4,8 kg./cm2 | 7,8 A |
| . | Motor 7,5 hp. 220-380 III 50hz. | 6.000 lts/h | 5,8 kg./cm2 | 10,9 A |
| MT-50 | Motor 7,5 hp. 220-380 III 50hz. | 21.000 lts/h | 5,0 kg./cm2 | 10,9 A |
| . | Motor de 10 hp. 220-380 III 50hz. | 21.000 lts/h | 6,0 kg./cm2 | 14,5 A |
*It is possible to supply 250 – 440-III 60 Hz motors.
Freshwater generator that uses:
- MT-32: TCS 2.5 / TCS 3 / TCS 4 /
- MT-50: TCS 5 / TCS 6 / TCS 8 (condensador) /
Technical charateristics
| MT-32 | MT-50 | |
|---|---|---|
| Inlet | Ø 40mm. Brida Ø 150mm. 4 holes of Ø18 en Ø110 |
Ø 50mm. Flange Ø 165mm. 4 holes of Ø18 en Ø125 |
| Outlet | Ø 35mm. Flange Ø 150mm. 4 holes of Ø18 en 100 |
Ø 50mm. Flange Ø 165mm. 4 holes of Ø18 en Ø125 |
| Motor | ABB 5,5 /7,5 C.V. 3.000 rpm or similar |
ABB 7,5 /10 C.V. 3.000 rpm. or similar |
| Housing and cover | Casting bronze RG-5 | |
| Impeller | Casting bronze RG-5 | |
| Shaft | Stainless steel | |
| Mechanical seal | 25 mm stainless steel and bronze | |
